Basement Wall Footing Thickness

When you are building a home, your basement is the first priority when it comes to building things right. This is the whole support of the home and should be considered carefully depending on the type of ground you are building on as well as how large of a house that this basement will be supporting.

Basement wall footing thickness will depend on the type of materials you are using to build the basement walls as well as the ground that you are building on. Here are a few guidelines for basement wall footing thickness.

Poured Walls

When you are using poured concrete walls to create your basement, you will want to the wall footing to be large enough to support a full concrete wall. The joint between the floor and the wall must be reinforced to prevent leaks. When poured concrete walls leak, it will most likely be between the floor and the wall.

This is because the pressure will build against the wall and the water is then forces down the bottom of the wall. Because of this, concrete walls are hard to prevent leaks. The consistency of concrete can take up to ten years to finish curing, so you will find that cracks and leaks are inevitable with this type of footing.

Block Walls

Block walls are another option for your basement wall footing. The thickness of the concrete for the footing will be about the same as solid concrete walls, but you will still have the risk of leaks if you do not reinforce the footing and the wall. Blocks have joints where the mortar can weaken, which will cause it to leak as well.

Stone Walls

Stone walls are not recommended for places that will have a lot of water in the ground. This is because there are many gaps and irregular spaces where water can leak in. With this type of wall, the footing thickness doesn’t really matter because a leak can spring anywhere, not just from the footing and the wall joint.

Monolithic Footings

This is the best type of footing that you can get for your basement walls. This footing is poured in one single piece so that it will prevent water problems in your foundation. It covers all of the places where it is typical to get cracks and leaks in your footing.

Make sure that when you are planning for the basement wall footings that you also install a waterproofing drainage system that will prevent situations that will give cause for serious structural concerns when a leak occurs.

If you want to basement footing to withstand time and water damage, you will want to not only build the footing properly, but also get basement wall inspections when you think that there may be a problem. If the basement is in danger of being unsound, you will want to get this taken care of as soon as possible in order to make sure no further damage happens to your home.