Bathroom Sewage Ejector Pumps

If you are concerned about the location, smell, and function of bathroom sewage ejector pumps in your home, you will want to first learn why this is located where it is, and what it does for your home plumbing system.

What is an Ejector Pump For?

A bathroom sewage ejector pump is a large hole in the floor where a specialized pump will collect waste from all of your plumbing fixtures. This waste water will be pumped up to a drain that will get it out of your plumbing system.

A bathroom ejector pump is used for houses that do not have a gravity draining system. It is usually located in the lowest spot of the house. This is the best solution for buildings that could not have a bathroom otherwise.

The Major Complaint

The major complaint with ejector pumps is that there can be odors to deal with. If you find that the odor is getting to be unbearable, this is a sign that you may need some maintenance on your bathroom sewage ejector pump.

Fixing Your Ejector Pump

If you are not sure about what you are doing, it is always best to call a plumber so that you know it will be done correctly. But if you want to tackle the job on your own, you can follow a few tips in order to check out the problem.

First, all sewage ejector pumps will have a local vent that is installed. This is a vent line that will connect from the pit to the outdoors. There is nothing else attached to it, and you will find that this is usually the most common problem with the pump when you are dealing with odors.

The vent could be blocked or in some other way preventing the odor from leaving the pit. But odors can also come from seals that are missing or are not functioning properly. This is the first place you should check.

The lid of pit should have rubber seals that will seal the lid to the put housing. There should also be rubber seals around the discharge line and vent line. If these seals are broken in any way, you will notice the odor that is seeping through these leaks.

Make sure to unplug the pump before you unbolt the lid from the housing. Then you can check to see of all of the seals are working properly. If one is broken or damaged, replace the seals and then bolt the lid back on and plug it in again.

If you are someone who does not like to deal with strong odors, this is probably a job that is best left to a professional. However, if you think you can stand the odor long enough to fix it yourself, it should be a pretty easy job for anyone who has ever replaced a rubber seal before.

No one wants to deal with unnecessary odors, so if your ejector pump is beginning to smell, you will want to make sure that there are not problems with the vent or the seals in the system.