Bath Tub Do It Yourself Installation

Bathtub do it yourself installation is a complex DIY project, but with some guidance it needed be impossible. Provided you have a fair understanding of the plumbing process, and a good idea of DIY in general, you should find the installation process relatively straightforward. In this article we will look at some tips and hints to help you when installing your bathtub.

What you will need

The first thing you need before you can begin your bathtub do it yourself installation, you should take care to select the right bathroom suite for you. Bathroom suites come in all different designs and styles, and it is important to try and secure on that you like, and that is within your budget. Make sure you are happy with your suite and the colour scheme, and try to visualise what the end result will look like.

There is no point in taking a gung-ho approach if you’re going to have to replace it three months down the line because you’ve gone off the colour. Most importantly you will need your bath. It is important you know the dimensions of your room, and work with a plan at all times to ensure everything will fit in correctly and to avoid problems.

Choose a suitable shape for your bath that corresponds with your bathroom. Also, make sure you can get the bath in the front door! There can be nothing worse than buying a bathtub and not being able to get it in the house. For the installation, you will need a range of equipment associated with plumbing, and you will probably need some idea of how household plumbing and piping works.

Installing your Bathtub

Start off by removing any existing bathtub that may be in place. This can be a good opportunity to get an idea of the plumbing, and so you should take great care and pay attention whilst you disconnect the pipes . Although it might sound obvious, make sure you turn off the water supply before you begin plumbing work.

Fit the new bathtub within its space, and connect up the existing pipe work. Finally, put the bath panel on to cover the piping, and that should be the job complete. You might also want to seal the edges of the bath after your bathtub do it yourself installation. This isn’t necessarily a problem either.

Simply fill the bath with water and then seal with a regular sealant. Filling the bath with water will ensure that the sealant doesn’t crack under pressure, and means that the sealant will be more effective for longer.

Bathtub do it yourself installation can be a particularly rewarding task, and is equally necessary from time to time. As long as you take the necessary care and precautions, you may not need to employ a specialist, which can cost a small fortune. If you are at all in any doubt about the plumbing aspect, you should perhaps consult specialist material on the matter.

There are plenty of DIY books, for example, which have helpful diagrams and instructions to make sure you know everything that is required. Don’t struggle with the plumbing work, and if you’re not confident you know what you’re doing, it is a good idea to seek professional help to avoid water damage to your bathroom, or damp within your structure.