How to Cut Crown Molding

The biggest problem that most people have with crown molding is just cutting it. Other than that issue, crown molding tends to be an easy to use method of adding some great finishing touches to a room. Therefore, if you are going to be using crown molding, you should make sure that you know how to cut crown molding. Once you have learned how to do this, then you will be able to install the molding without having too many other problems.

The first thing that you should keep in mind is that it is very difficult to learn how to cut crown molding. Even after you have learned how to cut the molding, you will probably have to spend some time practicing before you can get it right and get the pieces you need to complete your room.

Buy Extra to Practice Trimming

Therefore, after you have gotten instructions on how to cut crown molding, you should find the right tools and practice some before you start working on your cuts. Unless you are already experienced at cutting crown molding (and if you are, you probably are not reading this article), then you should expect that you will accidentally waste some pieces. It is recommended that you purchase more crown molding than you will need for just this reason.

When you are learning how to cut crown molding, you need to remember that you cannot cut it the same way that you would cut another type of trim. This is because the molding is not going to be sitting in the middle of the wall or against the floor. Instead, this is actually going to be fitted against your ceiling, and this will affect the shape of the crown molding.

However, the flat part of the back of the molding is not actually going to be touching the wall or ceiling. Instead, after the molding has been installed against the top of the wall, there should be an empty hole behind the crown molding and in front of the wall.

When you are learning how to cut crown molding, the most important thing to remember is the shape of the molding, otherwise you will cut it in a way that makes it sit incorrectly against the wall.

Turn Molding Upside Down for Best Results

The next thing that you should do while you are learning how to cut crown molding, is to turn the molding upside-down. This way, you will be able to see the strange shape of the molding itself, and be setting it up for the cuts. Even though turning the molding upside-down might seem like it is a pretty simple trick, this is actually the key point of the entire endeavor.

After you have turned the molding upside-down, you should make sure that you set your saw to do the correct cut. Most people will have their saw set to cut at right angles, however, you will only be able to learn how to cut crown molding if you set your blade at a 45 degree angle instead.

That is the biggest secret on how to cut crown molding. After that, you just need a lot of practice before you can start cutting crown molding like a pro. Now that you have well-cut crown molding pieces, you should be ready to install the crown molding in any room of your house.

Our Most Popular Online Tips