DIY Plaster Repair

diy plaster repairYou can improve the overall look of your home fairly easily with just the quick application of some diy plaster. If your walls are starting to look a little bit worse for the wear, you should still not worry too much. With a little bit of work, it is easy to make your home and walls look as good as new. A little bit of diy plaster advice is all that you need to get your home back into shape.

When most people look at a wall that is cracked, the first thing that they will think is that it needs new paint. While that is undoubtedly also the case, a fresh coat of paint will not last very long. Instead, you will need to make sure that you fix the underlying problems and fill the cracks before you start doing tiny fix-ups to just cover things up. Diy plaster is a good way to fix the actual problems with your wall.

Make Sure House is Sound Before Fixing Cracks

First, before you start with any diy plaster, you should take a good look at the type of wall damage you are looking at. There are two major causes of plaster problems. The first one that you should consider is just the chance that the previously used plaster was not very good to begin with. If this is the case, then the plaster will look as if it is crumbling apart.

The other problem that you might have is just that the plaster is beginning to crack due to stress from the environment. This can be caused by stress from people hanging things on the walls, or from any earthquakes that may have occurred since the building was built.

If you think that the damage was caused by earthquakes or other structural issues, then you should have the building checked out before you start with any diy plaster. This way, you can make sure that the new plaster will stick.

Give the Plaster Something to Stick To

The most important thing to do before you start putting down any new plaster is to make sure that your diy plaster will have something to stick to. For instance, if you are going to be fixing holes in the wall with plaster, you can easily do that by sticking a wire mesh in the hole. This wire mesh will give the plaster something to stick to.

If you are just going to be covering a small crack with the diy plaster, then you should make the crack wider. This sounds counter intuitive, but since plaster needs something to bond to, creating a large crack will just make it so that the plaster you apply will be up for years to come.

Most Repairs Require More Than One Coat of Plaster

For small repairs, just make sure that the original plaster on the wall is dry and clean. Then, you can just apply a thin coat of diy plaster to fill in the cracks and smooth things out again.

In order to apply diy plaster, you should mix it, and then use a metal trowel to apply it to the wall. The best method is to use a large trowel and to apply the plaster evenly. For best results, start in one corner of the wall you are covering and work your way to the other end.

Next, you should wait for the first layer of diy plaster to dry before you apply another coat. This is called the finishing coat and it can be easily applied with a smaller trowel. After this coat dries, you can go over the plaster once again and add designs or texture to the walls.

Our Most Popular Online Tips

photo courtesy of Nate Vack