How to Grout Travertine

Travertine is a beautiful type of natural stone that can be found in various shades. It is a very popular type of material used in homes to create countertops and flooring options. It is important that you know how to grout travertine properly in order to get professional looking results.

Before you begin this type of installation you need to take the time to carefully clean the surface below where you will be placing it. You also need to make sure the area is level or the travertine tiles may crack after you have installed them due to the differences.

Should you use a Sealant?

One of the features of travertine is the small holes on the surface that result in a very natural look. You want to avoid getting the grout into these holes as much as possible or it will have a negative effect on the overall appearance of your completed project.

You should consider investing in a sealer to prevent dirt and debris from being difficult to remove due to these holes. Don’t use a sealer that has a gloss to it because it won’t look natural.

Apply the sealant prior to the grout to help keep it out of these holes as well. If you decide not to apply the sealant but then discover you haven’t effectively applied the gout you have another option. There are grout reside removal products available. However, you need to be careful because some of them result in the travertine having a dull appearance.

The Grouting Process for Travertine

Choose the grout you will use for travertine very carefully. You need to have a good quality product or you will be disappointed with the results. Avoid using sanded grout as it has been known to scratch travertine. You want to mix your grout very well before you apply it to this particular material.

You want your grout mix to be the consistency of creamy peanut butter. If it is too thick it isn’t going to spread well. If your grout is too thin it isn’t going to be effective and it is going to be very messy to work with.

Take your time applying the grout and immediately remove any that gets onto the top of the tile. It is important to pay close attention to your grout lines when you are working with travertine.

It is a good idea to add a coat of sealer again to the travertine about a week after the grout has been in place. This will help prevent it from cracking over time and it will be much easier to clean.

Look for a sealer that is either water or oil based. It is best to use a sealer that is water based if the travertine is for countertops as you will be placing food on them. Again, you don’t want to use any sealer on travertine that is glossy.

Learning how to grout travertine is very important if you are going to use this type of material in your home. Make sure you take your time and apply it evenly after you have the travertine in place. You want to choose the color of the grout very carefully as it needs to blend in well. Travertine needs to look natural so the less noticeable the grout is the better your work will appear.

See Also: Thin Set Mortar for Travertine