How to Remove a Subfloor

Under every floor in your home is a subfloor that supports the main flooring that you walk around on each and every day. There are times that it becomes necessary to remove the subflooring in your home either to make repairs or to completely remodel a room. There are several options for removing a subfloor depending on the type of material and the depth of the home project that you are undertaking. Here are some tips on how to remove a subfloor.

Removal of the Main Flooring

The main flooring is the actual floor that you walk on each day. This can be hardwood, tiling, vinyl, carpet, linoleum or other surface materials. Before you can get to the actual subflooring, you will need to remove the main flooring.

If the job is to repair a warped area, dipped area or squeaky floor you only need to remove the main flooring around the area that is to be repaired. If you are completely remodeling the room, you will need to take up all of the main flooring in the room to get to the subflooring.

Removing Sections

Once you have removed the main flooring, it is time to remove the subfloor. It is easiest to remove the subfloor in sections. This will make it easier to complete the room and you can take breaks as needed instead of trying to complete the entire project in one afternoon. Additionally, if you remove a subfloor in sections the project is more manageable.

Concrete Subfloors

There are times that you will find concrete subflooring material beneath the main flooring. To remove concrete subfloors can be a little bit tricky. You should break a section of the concrete and lift it out in pieces. You can use special equipment for breaking concrete to make the job easier.

Be certain to take your time and do a little at a time so that you do not damage any pipes or anything else that is beneath the subfloor. A jack hammer, sledge hammer, power drill and cutter are very help to remove this type of subflooring material.

Plywood Subfloors

Plywood subfloors are much easier to remove than other types of subflooring materials. You can use a circular saw to cut out sections between the joists. A crowbar is handy for nailed areas and you can use a power drill for screwed in areas. Make certain to work your way out of a room so that you are not left in a corner with no type of flooring available at all to walk on.

Safety Equipment

When you remove a subfloor it is important to wear the proper safety equipment. A great deal of debris flies about the room and dust. Safety goggles, closed toe shoes, pants, long sleeve shirts and even a dust mask are excellent pieces of equipment to use while removing any type of subflooring. You should even use these when removing only a section of the flooring to be certain that you are safe and free from potential accidental injuries.