Impact drivers are expensive tools, but if you have to do any heavy duty screwdriving work, then they are definitely worth it. Impact drivers can drive screws into almost any material – including steel.
Since the tool is so much stronger than a normal drill, you should use this if you need to drive in screws and your drill isn’t strong enough to manage.
Stronger than the Average Power Drill
The best part of the impact drivers is just the strength. You will not have to worry about driving screws into any material – the tools are so strong that you are more likely to break the screw than you are to have any trouble with the tool. All you have to do is line the tool up, line the screw up, and then drive it into the wood.
Another benefit of impact drivers is that you will have a lot of precision as to where you stop the screw. You can even put it in by quarter turns when you get near the end.
Options: Angle, Corded, Cordless
There are a few different types of impact drivers, so you should check them out before you decide which one you want – after all, they all come with a pretty large price tag. Some of the differences between these drivers will be the way that they are designed. Some will be able to work at an angle, while others will only work straight on. Make sure you decide what type of head you need before you move on.
Beyond that, you should also decide if you want a corded or cordless impact driver. The cordless is recommended because you will have a much larger range of movement with it. That way, you can drive screws anywhere! The nice thing about drivers is that since they use very little energy to work, you will not have to charge the batteries very often.
Many people find that they like impact drivers for the power, but they are also relatively easy to use. There are not very many different settings, so you should be able to just start driving screws with it right away. These tools will also fit in your hand, so they will be comfortable to work with.
Noise can be an Issue
The biggest problem with impact drivers is just that they are loud. The driver uses a different type of technology to drive screws than a drill would. Since this requires a lot more mechanical movement inside of the casing of the tool, it’s just going to be a bit louder.
Therefore, if you’re worried about the noise, you can wear earplugs. However, the noise level, while louder than you will be used to, should still be manageable.
Another problem that some people have with their impact drivers is just that it is difficult for beginners to figure out when the screw has finished setting into the wood. The reason for this is that the tool is so strong that it will easily drive the screw completely through the wood without doing anything that you can feel.
With a drill, your arm will be twisted when the screw is completely into the wood. However, when you’re using these tools, you need to be careful to watch and see when the screw is in place.
Overall, if you’re looking for a professional quality tool for screwing in screws, then impact drivers are the best choice for you. There are a few things that you will have to get used to, but the higher performance will be worth it.