Painting Knockdown Textured Walls

A new coat of paint can liven up a dull and drab room. There is so much you can accomplish with just paint, but painting is not always easy if you have a special texture on your wall. Techniques for painting knockdown textured walls are in high demand as this texture is used more and more frequently in homes. The following article will explain what knockdown texture is, how to apply it to your walls and techniques for painting knockdown textured walls.

Knockdown Texture Basics

Knockdown texture is applied to a wallboard before painting. It can help to deaden sounds and also hides any imperfections in the drywall. It is a sought after texture because it provides a warm and rustic feel to a room. Its effects are similar to that of Spanish-style stucco. Although the knockdown texture is used a lot in apartments, homeowners seek it out as well. Many people are looking for techniques for painting knockdown textured walls.

Applying a knockdown texture to your walls is a fairly simple process, and a homeowner with the right tools and a little knowledge can apply the texture themselves. Part of the beauty of knockdown texture is that it does not have to be symmetrical. The texture has more interest when it is random and uneven, so you do not need to worry about being perfect. Before you need techniques for painting knockdown textured walls, you will need to understand how to apply the texture itself.

The knockdown texture process is easy, but also messy. If you are applying it to walls in a furnished room, you will need to use adequate drop cloths. The basics of a knockdown textured wall involve sheetrock joint compound sprayed in dollops over the surface of the wall.

This joint compound is allowed to set briefly, and then it is lightly troweled to knock down the tops of the dollops. This forms a rough, uneven finished surface. The uneven surface is part of the reason that so many people need techniques for painting knockdown textured walls.

Applying Knockdown Texture and Paint

The first step in bringing the knockdown texture to your home is thinning the sheetrock joint compound with water so it will spray through your application nozzle without clogging. The compound should be the consistency of thin pancake batter. Make sure to test the compound on scrap material first, before applying it on the walls.

Experiment with different nozzles and tips to get the type of spray pattern that you want. Spray on the compound with a small compressor and trigger-activated nozzle. Move over the wall in even stroke and cover the wall with a consistent amount of blobs.

Give the compound 15 to 20 minutes to cure, or test a small area for tackiness. Once the compound is tacky, you are ready to trowel. The point is to just remove the peaks of the dollops, and not smear them completely. Allow the wall at least 24 hours before attempting any techniques for painting knockdown textured walls.

Second Day

The next day, your new wall texture will be complete and ready for color. The problem with techniques for painting knockdown textured walls is that standard paint methods wont work. The flats and valleys your new wall texture will take paint in different concentrations. Knockdown texture will take longer to paint than a flat wall.

You will want to work in small sections and use two basic tools. Use a looped roller cover to apply the first coat of paint, and then a brush to fill in the missed valleys. Make sure to smooth out the paint with the roller before moving onto the next section. Proceed around the room in this manner, and you will have a wonderful textured and painted room.