Drywall is used in a large proportion of homes. Chances are, it may even be in your home, and if it gets damaged, you may find it relatively tricky to fix without the help of a professional. In this article we will discuss how to patch drywall on your own, without professional help, and offer some tips and tricks to make for that professional finish. Through this article, you will be able to patch your drywall effectively, and cover any unsightly gaps or craps which may have formed over the years, or through isolated damage.
Dealing with Smaller Holes
With smaller holes in drywall, you will find a relatively simple remedy through applying a joint compound. Firstly, sand the area in question to make it rougher for the application of the compound. This can be achieved by using a sanding block and apply fairly heavy pressure.
Next take the compound mixture and fill the hole. This should subsequently be left to set and dry after being smoothed out to remove any obvious undulations. The following day, the same procedure should be applied, in effect giving a second coat, which should again be left to dry.
Finally, prepare the area for a primer by sanding any roughage to create a smooth, professional finish. When it comes to dealing with larger holes, you may wish to leave the compound to dry for longer before repeating the process to make absolutely sure it has set in place. And that is how to patch drywall holes. A relatively straightforward procedure, patching holes is relatively similar to fixing cracks which may appear in drywall from time to time.
Patching Cracks in Drywall
Now we know how to patch drywall holes, how do you patch cracking in drywall? Well, for this you will need a specialized patching compound, which can sometimes come in the form of tape to be applied over the area.
Firstly make sure the cracking is free of any excess dirt or loose material, before working the compound into the crack with a firm paint brush, or similar. This will ensure the compound fills the actual gaps rather than sitting on the surface.
After doing so, run a wet paint brush over the area for further sealant and to remove any excess, before leaving to set and dry. Again, apply a second coat if necessary and sand off any excess after drying.
Next, you will be able to apply a coat of primer similar to above, thus creating that professional look over the site of the crack. Repairing drywall, although requiring a degree of skill and dexterity is not an overly complex challenge, and is a task that can easily be performed by any DIY enthusiast with the time, patience and inclination to learn how.
And that is how to repair drywall. By following these easy, consistent steps, you can guarantee a more professional coverage of drywall damage without the need for expensive professional help. This way you can be sure that your indentations are filled and sealed to avoid any future problems, and if you work with care, you will even be able to cover up the repair job so no one will ever know. With these easy to follow steps, you can be repairing your drywall in no time.