If you have a section of ceramic tile in your home, then you should definitely be looking for a type of sealant to put on the grout between the tiles. Sealant for ceramic tile grout is a great way to keep your tiled area looking clean and new for years to come.
Additionally, by sealing the grout, you can also prevent damage to the tiles. Therefore, it is highly recommended that anybody who is installing ceramic tiles also makes sure to use sealant for ceramic tile grout.
Standard or Stand and Spray Sealant
There are a few different types of grout sealers. The type of sealant for ceramic tile grout that is right for you depends on the place that you have put the tile, as well as what type of an appearance you want the grout to have after you have sealed it.
Most sealant for ceramic tile grout will only protect against normal household elements and stains. This sealant will lock out stains and mildew in order to keep your grout looking clean. However, if you are worried about stronger stains, then you should look for a commercial sealant.
There are some sealants on the market that will even lock out hot grease. This is ideal for kitchen areas, since the normal sealant will not protect your grout from this type of stain.
The easiest type of sealant for ceramic tile grout is the stand and spray type of sealant. This is an inexpensive type of sealant, so if you want to seal your floors without spending a lot of money or extra time, then this is definitely the option for you.
Two things that you should look out for if you are using these types of sealants are the following. Make sure that the sealant is not going to leave a residue on the tiles if it lands on those. Some of the sealants will look terrible if they dry on the ceramic tiles. Second, make sure that you are buying a brand of sealant that says roughly how long the tile grout will remain sealed for.
Stand and Spray Requires Good Ventilation
Before using any stand and spray brands of sealant for ceramic tile grout, however, you should make sure that the room you will be using it in is very well ventilated. You should also not use this type of spray if you have any history of breathing problems as there have been some cases of breathing problems after use.
If you are wary of using stand and spray sealant for ceramic tile grout, then you should look into using one of the other types of sealant that are on the market. There are several available, and most of them seem to work fairly well; in addition, they tend to cause the water to bead up on the grout itself, instead of soaking in.
You can apply sealant for ceramic tile grout by getting down next to the tile and just wiping the sealant onto the tile itself. If you get any of the grout sealant on the tiles, then you should make sure that you wipe the sealant off before it dries, otherwise there might be a residue left on the tile.
Let Grout Dry Completely Before Applying Sealant
No matter what type of sealant for ceramic tile grout you end up using, there is one thing that you should always do. Make sure that you wait for the grout to dry and set completely. For this reason, it is usually recommended that you let the tile sit for a few weeks so that it is completely dry before you start to seal it.