Using a table saw is one of the most efficient ways to cut large quantities of wood accurately and quickly. Although the initial investment for a table saw may be steep, it is certainly worth it for anyone concerned in cutting large amounts of wood. Having said that, it is a particularly dangerous tool which should be handled with the utmost care and respect at all times to avoid injury. In this article, we will look at some of the key tips and table saw techniques to ensure safety and effectiveness when using your table saw.
The most important factor when dealing with a table saw is safety. With such a sharp implement spinning at such a high rate of RPM, it is a potentially lethal contraption, so it is important to follow the strictest safety procedures at all times.
- Firstly, keep hands well away from the blade at all times. Use the table saw only for larger cuttings, and use handheld implements for more detailed cuttings.
Secondly, make sure you identify the location of the Off button. This minor step could save your life, or a limb if you get into trouble.
It is also important to ensure that you wear glasses or safety goggles at all times to prevent shavings or splinters of wood from penetrating the eye and causing sight problems.
Along similar lines, ear protectors should also always be worn to avoid permanent hearing damage which can arise from the loud nature of the saw.
It also goes without saying that there should be no horseplay around the machine, as there have been many such instances reported as the accidental cause of death or severe injury to some unfortunate person.
These basic table saw techniques are designed to keep you safe, and although some of them may seem overly cautious, it is imperative that you follow these rules at all times.
When cutting, there are a number of table saw techniques which can help ensure more accurate results.
- The first tip is to use a pencil to mark off measurements. Do not make subtle marks on the wood, the more obvious the better. Pencil can always be easily erased afterwards during the finishing process, so make sure you mark clearly and obviously where you need to cut the wood.
Another good tip is to mark areas of waste by shading with your pencil. This rough shading will indicate wasted wood, and so you will know which piece you intended to keep should any confusion arise.
Another good tip to bear in mind is that you should always cut slightly outside your mark. This will take account of the thickness of the blade, and it is easier to sand excess than try to add extra, so it is better to overestimate.
A table saw can be a particularly useful addition to any toolkit. For anyone professionally involved in wood, it is a must-have, time saving device. With these simple tips for safety and for better performance, you can make sure you get the most effective results out of your table saw. For more table saw techniques, you should try consulting some of the numerous woodworking forums online, or alternatively look for interest groups within you area, where you can meet likeminded people and discuss ideas.