Tinting Windows the Easy Way

Although windows are a beautiful feature of our homes; tinting a window provides numerous advantages. For example, a tinting window home improvement will reduce the amount of ultraviolet radiation that is allowed into your home. Because of this a tinting window installation will reduce the fading of furniture and fabrics that occur as a result of exposure to sunlight. Due to the fact that windows tend to be rather poorly insulated, tinting window can also improve your home's energy efficiency. Tinting window can be an easy and surprisingly inexpensive way to cut down numerous problems.

Materials

You will need only a few tinting window materials to get started on your way to darker windows, less sun exposure, and a lower summer cooling bill. To begin tinting window you will first need tinted window film. You cannot be tinting windows without that. Tinting window film is available at most home improvement retailers and is relatively inexpensive.

You will also want a spray bottle, a measuring tape, a ruler, yardstick, or some other form of straightedge, a marking pen (Sharpie markers work great) a utility knife (the type with breakaway blades is best), a razor blade scraping tool, a broad knife, a window cleaning squeegee, and a few coffee filers.

Basic Steps

To get started tinting windows, prepare a mixture of liquid detergent and distilled water in a spray bottle and clean the window. Any caked on dirt or grime should be removed with the scraping tool before proceeding with the next tinting window step. Use the coffee filters to remove dirt from the window gasket. Basically you will need to do the windows like you have never done windows before prior to installing the window tinting.

The next step in tinting window is to measure the window then unroll the tinting window film on a flat surface and cut a piece approximately one inch larger than the window itself. Spray the window once again with the cleaning solution but do not wipe away the water this time.

Carefully remove the backing from the tinting window film and spray the adhesive side with the solution as well. Apply the tinting window film to the window and carefully press out any air bubbles or trapped water. Using the utility knife and broad knife, cut away the excess tinting window film. Eureka, you are done.