Black Window Mold

There are various forms of mildew and mold in existence that could cause your home to weaken or even crumble in front of your very eyes. This may sound dramatic and it should do because that is the reality of the situation unless you actually take care of the problem as soon as you notice that it is there. One of the worst forms of mold that you could encounter in your home is black window mold.

What Is Black Mold

There are actually two kinds of black mold. The first is actually toxic mold that will grow in and on drywall. The second is a less harmful mold that will manifest itself in the window frames, no matter what they are made of.

Both are caused as a direct result of dampness within the home and also the high relative humidity that artificial heating elements can cause. Obviously, the toxic form of the black mold should be professionally treated purely and simply because it is toxic. However, you can deal with the black window mold that is not toxic yourself.

There are actually five steps that you must take in order to not only remove the mold, but eradicate the problem as well. You must take care of the root of the problem because it would otherwise come back time and time again, and would ultimately damage your windows beyond repair. The five steps that you need to take are outlined below:

The 5 Steps To Get Rid Of Black Window Mold

    1. Get To The Root Of The Problem – You should do this before doing anything else where mold is concerned because you cannot get to the heart of the problem and solve it if you have already removed the mold itself. This is because you cannot see the damage that lurks below the surface! Black mold can be extremely destructive around the window area so you will need to note any areas of visible moisture, check the humidity of the area with a specially designed sensor. Move all fixtures and fittings from the area and prepare for step two.

    2. Seal Off The Area – It is important to remember that black mold spores will spread vi the air if you do not treat it carefully so always make sure that you have the area sealed off. You should make sure that all windows and doors are shut and the area in question should be as isolated as possible. Never use the tools that you use again until they have been thoroughly steam cleaned and disinfected, and always boil wash your clothes afterwards as well.

    3. Clean The Mold – Dust the area to ensure that there is no excess dirt on the window and then dampen the mold slightly. You should use a misting water spray to do so because this will actually prevent the black window mold from spreading. The area around it should be as clean as possible before you start the removal process.

    4. Remove The Mold – Use disinfectant soap to remove the mold. The soap will kill the spores as it goes and help you to rub them off the walls. Use a damp old cloth to put the spores on after you have removed them with a blunt, rounded knife or spatula. After removal, use strong disinfectant to thoroughly clean the affected area and then make sure that it is completely dry afterwards. If it is still wet hen the mold is likely to come back. You can use a heating implement to do so. If you do not have a trade tool, you can simply use a hairdryer! It may also be a wise move to use an air purifier afterwards to make sure that all spores are completely removed from the room, air and all.

    5. Check And Double Check Your Work – Make sure that there is no moisture left in the area and that the initial problem has been fixed completely. Also, make sure that there are no signs of mold left. It may be that the surface area is stained and even damaged, but there should be no mold present at all. If all of these earn check in your book then you have done a great job!