Replacement Aluminum Casement Windows Guide

If you are considering renovating your property then the likelihood is that you will at least think about tearing every room to pieces and starting again. If that is the case and your property is more than a few years old, you should consider replacing all of the fittings too so that any degradation, and thus possible weak spots, is removed before your start.

Once those fittings have been removed, the room is your blank canvas to work with. However, you may want to replace the windows before you do anything else. Replacement Aluminum casement windows are the ideal choice for anyone renovating their home.

Why Aluminum

Replacement Aluminum casement windows come highly recommended by interior designers and individuals working in construction. There are a number of reasons behind this, but most of them have to do with the properties of the Aluminum itself in alloy form.

Firstly, Aluminum alloys are incredibly strong. They are designed to withstand extreme temperature fluctuations without buckling. They therefore support the integral structure of any house and will not degrade or corrode. Aluminum alloys are lightweight, despite their strength, and so will not weaken a wall or cause it to buckle.

Aluminum windows are also fairly cheap in comparison with some of the other materials out there because the cost to manufacture them is really low. There are very few disadvantages to choosing replacement Aluminum casement windows because they will only serve to enhance your home, and will continue to do so in the foreseeable future.

Installing Replacement Aluminum Casement Windows

If you do choose to install replacement Aluminum casement windows then you must be fully aware of how to fit them correctly. If a window is poorly fitted then it can cause severe damage to any given room. It can allow damp access to the walls, render insulation redundant and cause a major weakness in the structure of your home. However, if you follow the steps below then you will have no problem fitting them effectively:

    1. Centre the window in the rough opening that has been created in the wall. If it is where the previous window was then make sure that the opening is sheathed ready for the replacement Aluminum casement window. Make sure the window is level and then shim if necessary. You will then want to work on the window one side at a time. Drill pilot holes to roughly attach the window and keep it in place. Again, shim if necessary. Double check the positioning again and make sure that the fit is tidy before nailing it into place for good.

    2. Replacement Aluminum casement windows will need to be attached via flanges before completing any final steps. Follow the above guideline, but then nail the flanges to the window sheathing that was already in place. If extra room is needed for this art, expand the hole, but never trim the windows.

    3. The final step is insulating the new window. Foam can be used to insulate effectively, so make sure that any gaps are filled. This especially means between the jamb and the frame because that is a major area of weakness. Once this process is complete, you should move on to finishing the wall around it.

Replacement Aluminum casement windows are perfect for renovated homes. Installation is relatively easy as long as you take your time and make sure that the job is completed very precisely. There is no margin for error when you are replacing windows. However, the short term aesthetic benefits and the long term structural benefits that they bring are extremely favourable and will allow you to effectively protect your home for years to come.